KD-820&LV-200
Adsorption-type pouch dispenser
The device consistently cuts continuous packaging pouches into one pouch (multiple pouch units are also possible) at a time, and loads the adsorbed pouches in place such as on a conveyor line at a high speed without error. The device can be used for various types of pouches including powders, drying agents, oxygen absorbers and liquids.
Drawing
Motion
* Some of the links displayed after the video is not related to us
Labor saving effects
Manual work
approx. 30 pouches/minAfter installing the device
approx. 200 pouches/min
Features
- Feeding capacity: 200 pouches/min
- Gently loads pouches to a fixed position at an accurate timing by adopting an AC servo motor drive.
- It cuts and adsorbs simultaneously, so the pouches can be loaded in the same position each time.
- Optimal for right-angle loading and attaching/loading to the packaging machine conveyor.
- By combining this device with hot melt coating equipment or the TM-200 (double-sided tape applicator,) attachment to packaging film can be performed accurately.
Specification
| Feeding capacity | 200 pouches/min (maximum) ＜With 70mm pouch length＞ *The longer the pitch of the pouch length is, the lower the capacity will become. *The maximum capacity will vary depending on the conditions of the packaging materials and contents. |
|---|---|
| Pouch specification |
Width 20 – 80mm Length 25 – 90mm Thickness 1 – 10mm |
| Power supply | 3φ AC200V 50／60Hz 1.5kVA |
| Weight | Approx. 46kg |
| Air source | 0.5MPa 100L/min (ANR) dry air |
