• #Actuator

An actuator which is used for alignment control of the unwind and windup part of the web. It is used in combination with G-series controller and sensor. It has a built-in brushless motor and is superior in maintainability and achieves high response and high precision. Mass tolerance is 3000kg.



①Brushless DC geared motor  ②Connector  ③Slide rod ④Switch unit ⑤Electric component box ⑥Stand ⑦ Motor power supply connector (accessory)  ⑧McBus connector (sold separately)  
※1: Mounting hole ※2: Mounting hole ※3: Power cable (non-included accessory)


  • Maintenance-free brushless DC motor is adopted.
  • Compared to the conventional PD series, a more speedy and precise alignment correction control is made possible.
  • Because only a connector is necessary to connect PEM-type controller and PSM-type sensor, the wiring job is made simple.


Thrust 2400N (244kgf)
Stroke 180mm
Driving speed 16mm/s
Mass 18kg
Power supply DC24V±20%
Consumption current 3.5A
Operating environment/th>

Temperature :0 – 50 ℃
Humidity :80%Rh or lower (no condensation)
Connection equipment Controller PEM-200、PEM-3000
Sensor PSM-type sensor
Power supply: Supplied through the accessory power supply connector (please prepare your own cable).
CAN bus: Connect to the controller and sensor using a dedicated cable sold separately. Please refer to the PEM controller catalog for connection structure.