PDM-400

Actuator

  • #Actuator

An actuator which is used for alignment control of the unwind and windup part of the web. It is used in combination with G-series controller and sensor. It has a built-in brushless motor and is superior in maintainability and achieves high response and high precision. Mass tolerance is 1000kg.

PDM-400

Drawing

①Brushless DC geared motor ②Connector ③Slide rod ④Switch unit ⑤Electric component box ⑥Stand ⑦Motor power supply connector (accessory)  ⑧McBus connector (sold separately)
※1: Mounting hole ※2: Mounting hole ※3: Power cable(non-included accessory)

Features

  • Maintenance-free brushless DC motor is adopted.
  • Compared to the conventional PD series, a more speedy and precise alignment correction control is made possible.
  • Because only a connector is necessary to connect PEM-type controller and PSM-type sensor, the wiring job is made simple.

Specification

Thrust 1300N (132kgf)
Stroke 50mm
Driving speed 25mm/s
Mass 6kg
Power supply DC24V±20%
Consumption current 2.5A
Operating environment Temperature:0 – 50 ℃
Humidity:80%Rh or lower (no condensation)
Connection equipment Controller PEM-200、PEM-3000
Sensor PSM-type sensor
Power supply: Supplies through the accessory supply connector (please prepare your own cable).
CAN bus: Connect to the controller and sensor using a dedicated cable sold separately. Please refer to the PEM controller catalog for connection structure.