Miravo Roll

roll outside diameterφ160 ・roll length under 2600mm elastic code type expander roll.
This is a rubber tube type wrinkle removing roll.
It can be used to remove wrinkles from non-woven fabric, plastic film, paper, glass fiber and metallic foil.
The rubber tube coated along the outer surface of the roll expands and contracts with the roll rotation due to its special inner structure. When a web is wound, it will spread open with the rubber’s stretching action. This will remove wrinkles from the web.



L: Roll length (1) End plate (2) A-type V pulley, outer diameter Φ160


This is a rubber tube type non-curved straight wrinkle removing roll. It can be used to remove wrinkles without straining the webs.

  • Scope of application
    This is a wrinkle removing roll with a tension of 1200N or less.
    Rolls are manufactured with an outer diameter of φ160 and a roll surface length in the range of 300 to 2600 mm. However, the role surface length changes at a 50㎜ pitch due to its structure.
  • Deployment amount
    The deployment amount is set by the angle and the number of the ring-shaped rotating bodies. The deployment amount cannot be adjusted.
    Maximum deployment amount: 2.9 mm
  • Mounting direction
    The sheet pass line is compatible with any direction from horizontal to vertical. The sheet winding angle around the roll is generally set in the range of 30 to 90°.
  • Wide range of applicable films
    Demonstrates its effects in removing wrinkles from a wide range of web materials, from ultra-thin (several microns) soft film to rigid metal sheet such as Cu and Al.
  • Compatible with high-speed lines
    Compared to the elastic band type (FE) wrinkle removing roll, this rubber tube type (MRV) wrinkle removing roll is designed to support high-speed lines.
    Maximum sheet speed: 500m/min
  • Synchronous rotation pulley
    Due to its structure, there is rotational resistance. When used at low tension, attach the pulley to the roll and rotate it so that the line speed and the roll peripheral speed are synchronized.
    *Compatible with timing belt as an option


Roll diameter (mm) 160
Roll length (mm) 300~2600 (50-pitch)
Rubber deployment
amount (mm)(*1)
Starting torque (N/m) (*2) 0.21~3.59
Line speed (m/min) 500~400 (reference value when allowable tension is applied)
Applicable webs Non-woven fabric, film, paper, glass fiber, metallic foil
Environment Dry(45 – 85%RH)(*3)
Maximum temperature: 80℃
Rubber materials(*4) EPT(White / black)
NBR(White / black)
*1 Deployment amount when using a 90° sheet and a standard angle (2.5°) ring.
*2 The data above is a reference value, and may vary depending on the role length, rubber materials and individual differences during assembly.
*3 We also offer a special specification vacuum compatible MRV roll.
*4 Rubber properties are listed in the general catalog.