PD-710
Actuator
- #Actuator
An actuator which is used for alignment control of the unwind and windup part of the web. It is used in combination with Q-series control panel and detector. The overall length is shorter than that of PD-610 and is suitable for installing in small spaces.
Drawing
※1: Mounting hole
※1: Mounting hole
Features
- Long life and ease of maintenance and inspection
Due to ball screws used in the drive mechanism, most of the parts are wear resistant. It has a long life and is easy to maintain and inspect. - Equipped with microswitch for center position detection
By pushing the center stop switch on the control panel, the actuator may be set at center position in advance.
Specification
| Thrust tolerance | 412N（42kgf） |
|---|---|
| Mass tolerance | 1400kg |
| Stroke | 100mm |
| Driving speed | 13mm/s |
| DC motor | DC24V 1.2A |
| Mass | 12kg |
