PD-400
Actuator
- #Actuator
An actuator which is used for alignment control of the unwind and windup part of the web. It is used in combination with Q-series control panel and detector. It is used for devices with total weight of 1300kg or less.
Drawing
Features
- Long life and ease of maintenance and inspection
Due to ball screws used in the drive mechanism, most of the parts are wear resistant. It has a long life and is easy to maintain and inspect. - Equipped with microswitch for center position detection
By pushing the center stop switch on the control panel, the actuator may be set at center position in advance.
Specification
Thrust tolerance | 392N(40kgf) |
---|---|
Mass tolerance | 1330kg |
Stroke | 50mm |
Driving speed | 20mm/s |
DC motor | DC24V 1.5A |
Mass | 6kg |