MR-210

End Pivot-type Large Roll Guide

  • #End Pivot-type Large Roll Guide

End pivot-type roll guide used in carrying out alignment control in the intermediate process of web transport.

MR-210

Drawing

①Drive ②Roll frame ③Front-side roll ④End-side roll  ⑤Switch unit
L: Roll surface length Lp: Roll span
※1: Mounting hole

Features

  • Optimum for position control during sheet processing line
  • Optimum for materials with elasticity
    If the web deviates from the detection reference position, it moves sideways and returns to its detection reference position while making an arc-shaped rotational motion. Therefore, it is suited for lines in which there is sufficient space between rollers set up in front and behind the roll guide. In addition, web materials are suited for materials which have elasticity and absorb tension difference such as vinyl, polypropylene, textile fabric and tire cord.

Specification

DC motor DC24V 2A
Correction speed 10mm/s
Control volume ±85mm
Maximum sheet speed 200m/min
Maximum sheet tension 980N(100kgf)
Roll surface length 440 – 2500mm
Roll diameter Φ100 (standard)
Roll span 150 – 400 mm